Reliable, cost effective solution that does the job.
	316 annealed* stainless steel.
	Rolled band edges to eliminate the risk of damage to the hose.
	Extra wide threads of the band are stamped leaving the un-perforated band smooth on the inside.
	Band and screw threads are properly pitched rendering the clamp virtually immune to vibration back-off.
	The joining of the band to the housing is arranged in such a manner that the least possible deviation from a circular shape arises while the clamp is being tightened.
	Pre-lubricated drive gear for smooth operation.
	Range in size from 7/16" OD (outside diameter) to 11 1/8" (11 mm to 285 mm).

*316 Annealed stainless steel is far more corrosion resistant in the marine environment when compared to the performance of common stainless steel types 304 or 302 used in other brand worm gear clamps.

TIPS: If you use the flexible clamp driver, you will not exceed the suggested torque value (45-55 inch/lbs.) tightening. +

© 2002 # 1 Exhaust Systems Boat Marine Yacht Diesel Exhaust